उद्देश्य: सामान्य: डीसी (LVDT)

उत्पाद वर्णन

The DC-SE Series LVDTs operate on a single-ended DC power supply, and provide either a 0 to +5VDC or +1 to +6VDC output signal (wiring dependent) over their full range of displacement. The extremely linear and low noise output makes the DS-SE Series the perfect choice for interfacing to unipolar inputs of analog-to-digital converters, PLC's, and various data collection systems.

The DC-SE is internally regulated, thus providing immunity to line ripple and allowing operation from unregulated power sources of between 8.5 and 28VDC. The very low typical 6mA current draw is ideal for remote or battery powered applications. The highly stable oscillator provides excellent temperature performance throughout the operating temperature range, while synchronous demodulation insures superb noise rejection.

The built-in EMI/ESD protection and the shielded cable permit operation in noisy industrial environments, with double magnetic shielding providing the utmost protection from stray fields.

Like in most of our LVDTs, the DC-SE windings are vacuum impregnated with a specially formulated, high temperature, flexible resin, and the coil assembly is potted inside its housing with a two-component epoxy. This provides excellent protection against hostile environments such as high humidity, vibration and shock.

Available in a variety of stroke ranges from 0.1 to 6 inches, the DC-EC Series can be configured with a number of standard options including metric threaded core, guided core and small diameter/low mass core.

Captive core option: The DC-EC features an optional captive core design (available for most models) that greatly simplifies installation. The core rod and bearing assembly includes a Bronze bearing on the front end for self-alignment, while a PTFE sleeve allows low-friction travel through the stainless steel boreliner (spool tube). The core rod and the bearing assembly are both field serviceable.

Also see our other LVDTs with built-in signal conditioning: DC-EC (+DC voltage), HCD (Hermetically sealed, +DC voltage), HC-485 (RS485 digital output), and the HCT-IS (Intrinsically safe, 4-20mA, 2-wire loop).

Details :

• Single-Ended DC operation
• Low 6mA current consumption
• Stroke ranges from 0.1 to 6 inches
• 0.25% linearity
• Stainless steel housing
• Double magnetic shielding
• EMI/ESD protected
• 1 meter long shielded cable
• Captive core option

Features :

• Unipolar DC operation
• Low power consumption
• Shock and vibration tolerant
• Captive core option (available on select models)
• AISI 400 Series stainless steel housing
• CE compliant
• Calibration certificate supplied with each unit

Applications :

• Factory floor automation
• Position feedback
• Data collection
• Process control
• Metrology
• Portable / battery powered measurements
• General industrial

Performance Specifications :