नियर इन्फ्रारेड (NIR) मापन के लिए पहला और सबसे अच्छा विकल्प
उत्पाद विवरण:
नियर इन्फ्रारेड (NIR) मापन के लिए पहला और सबसे अच्छा विकल्प मूल्य और मात्रा
- 1
- टुकड़ा/टुकड़े
नियर इन्फ्रारेड (NIR) मापन के लिए पहला और सबसे अच्छा विकल्प व्यापार सूचना
- कैश इन एडवांस (CID) कैश एडवांस (CA)
- 100 प्रति सप्ताह
- 3 दिन
- Yes
- नमूना लागत, शिपिंग और करों का भुगतान खरीदार द्वारा किया जाना है
- ऑल इंडिया
उत्पाद वर्णन
Each MCT460 measurement produces analog and digital outputs for control. Bus Interfaces, such as Ethernet, Modbus, Profibus, etc are also available. The MCT460 is made up of 5 basic components: a quartz halogen lamp, a filter wheel motor, multiple NIR interference filters in a rotating filter wheel assembly, a Lead Sulfide detector and a single "smart" circuit board. The MCT460 is fully modular - each of these components can be replaced in the field within minutes.
The Near Infrared (NIR) Operating Principle
Light from the lamp is directed through the rotating, narrow band-pass NIR filters. The filters separate the light into NIR wavelengths, selected specifically by PSC for the measurement and application being performed. The NIR light is then directed onto the product being measured, normally on a conveyor belt or moving web. Subsequently, the light reflected off of the product is captured by a mirror and focused onto a Lead sulfide detector. The detector’s microvolt output is then taken by the on-board "smart" circuit board and converted into percent moisture or other engineering units.
Stand Alone Configuration :
- Connects directly to PLC
- No Operator Interface required
- Powered at the MCT460 Transmitter
- All Analog Outputs, Digital and Bus interfaces directly from the Transmitter
- 5.7" Operator Interface/Display (optional)
System Configuration :
- Transmitter connects to Operator Interface
- Transmitter powered from Operator Interface
- All Analog Outputs, Digital and
- Bus interfaces from Operator Interface
- Large 5.7" high resolution Touchscreen
MCT460 Features & Improvements :
- New micro controller, high performance, dual core architecture. One core dedicated to NIR signal acquisition, the other programmed to manage computations and communications options
- Samples entire NIR signal train for increased measurement accuracy
- Embedded bootloader allows sensor firmware to be upgraded through USB or serial interface
- Filter wheel speed adjustment through software
- Temperature controlled PbS detector for enhanced stability
- Built in cooling panel and Air Purge Assembly
- Ergonomically sound IP67 cast aluminum enclosure
Specifications:
| Measured NIR Constituents: | 1, 2 or 3 simultaneously |
| Moisture Range: | Min. 0.1%, Max. 95%* |
| Coatings Range: | Min. 0.1gr./m, Max. 200 gr./m |
| Fats/Oils: | Min. 0.1%, Max. 50%* |
| Accuracy: (subject to application and product type) | |
| Moisture Range: | +/- 0.1% |
| Coatings Range: | +/- 0.1 gr./m |
| Fats/Oils: | +/- 0.2% |
| Repeatability: | +/- 0.2% |
| Transmitter/Product Distance | 8-18 inches (200-450mm) |
| Calibration Codes: | 100 |
| Response Time: | 1-999 seconds. Three modes available Damping, Integration and Gated. |
| Power: | 90-260VAC, 50/60 Hz, 40 watts |
| Outputs: | 4-20 mA & 0-10 V (isolated), RS232 & RS485 |
| Weight: | 19 lbs. (8.6kg)/IP67, Cast Aluminum |
| Ambient Temperature: | 0-50 °C (32-120˚F) with water or air cooling up to 80°C (160°F) |
| Window Purge: | Airpurge Diffuser |
Operator Interface: Wall or Post Mounting
| Display: | 5.7 inch Color Touchscreen LCD |
| Language | User Selectable |
| Power | From MCT460 Sensor or Local |
| Cable | 10 ft (3 meters) standard |
| Enclosure | Cast Aluminum |
Maintenance :
| Warranty | 24 months Parts/ Labor |
| Routine Cleaning | Non Required |
| Calibration Verification | Calibration Check Standards |
| Cooling | Vortex Air Cooler (Optional) |
Online Moisture Transmitter अन्य उत्पाद
सम्पर्क करने का विवरण
GST : 27AABCJ7018B1ZY
जांच भेजें
|
 |
JUPITER INTEGR SYSTEMRATED SENSOS PVT. LTD.
सर्वाधिकार सुरक्षित.(उपयोग की शर्तें) इन्फोकॉम नेटवर्क प्राइवेट लिमिटेड . द्वारा विकसित एवं प्रबंधित |